|Michael Steil 2090bca64f fixed mse1351 filename in Makefile||hace 2 meses|
|drv||hace 4 meses|
|inc||hace 2 años|
|input||hace 2 meses|
|kernal||hace 3 meses|
|reference||hace 2 años|
|.gitignore||hace 3 meses|
|Makefile||hace 2 meses|
|README.md||hace 4 meses|
|config.inc||hace 2 años|
|regress.sh||hace 2 años|
by Berkeley Softworks, reverse engineered by Maciej Witkowiak, Michael Steil.
GEOS is a graphical user interface for 6502-based computers. In the 1980s, it was commercially available for the Commodore 64, 128 and Plus/4 as well as the Apple II.
GEOS has extremly low hardware requirements:
With just 20 KB of binary code, the GEOS “KERNAL” has the following features:
The default shell of GEOS is deskTop, a file manager an application launcher.
Several powerful applications are available for GEOS, including
The cc65 compiler suite allows writing GEOS applications in C or assembly.
This is the reverse engineered source code of the KERNAL (plus disk and input drivers) of the English version of GEOS 2.0 for Commodore 64 and Commodore 128.
The source has been heavily reorganized and modularized, nevertheless, a standard compile will generate binaries that are identical with the GEOS 64 2.0 and GEOS 128 2.0 distribution binaries.
Optionally, the following features that were not part of the original GEOS 2.0 can be enabled for GEOS64:
Without pucrunch/c1541, you can still build an uncompressed KERNAL binary image.
make to build the original “BSW” GEOS for C64. This will create the following files in directory
If you have the cbmfiles.com
GEOS64.D64 image in the current directory, the disk image will be based on that one, with the
GEOBOOT files deleted and the newly built kernel added. Otherwise, it will be a new disk image with the kernel, and, if you have a
desktop.cvt file in the current directory, with
DESK TOP added.
The build system supports the following variants:
bsw(default): Berkeley Softworks GEOS 64 2.0 variant
cbmfiles: The cbmfiles.com version. It starts out with a different date, and has some variables in the kernel pre-filled.
gateway: The patched KERNEL shipped by gateWay 2.51. It contains a slightly modified BSW font, has the
Paniccode replaced with code to swap the disk driver on a RESTORE press, and it loads
DESK TOPas the shell.
wheels: The Wheels 64 variant. It is heavily patched, optimized for size and speed, and contains additional features. It requires a RAM extension. The current version compiles into the same binary, but won’t actually run because of missing boot code. More work is needed here.
bsw128: Berkeley Softworks GEOS 128 2.0 variant, i.e. GEOS for C128 with 128 KB RAM and VDC 640px width support. This needs some more work to actually boot.
custom: See below.
You can build a specific variant like this:
All output will be put into
By default, the KERNAL image will contain the Commodore 1541 disk driver (
drv1541) and the joystick input driver (
joydrv). You can specify different drivers to be included like this:
make DRIVE=<drive> INPUT=<input>
Supported drives are
drv1581. Supported input devices are
The KERNAL variant
custom is meant for your experimentation. Inside the
.ifdef custom section in
config.inc, you can toggle several compile time options:
removeToBASIC = 1: Don’t include the ToBASIC code required for deskTop to launch non-GEOS applications, in order to save RAM for code.
use2MHz = 1: Switch a C128 in C64 mode to 2 MHz outside of the visible screen.
usePlus60K = 1: Enable support for the +60K RAM expansion.
useRamCart64 = 1,
useRamCart128 = 1: Enable support for the Ram Cart expansion.
With RAM expansion support, GEOS will use the extra RAM for caching deskTop and for holding the swap area when running desk accessories. GEOS will show an error at startup and reset the system if support for a particular memory expansion is enabled but it is not available.
Note that the changing settings and adding code may cause certain memory areas to overflow. In this case, you can try moving segments between the
KERNAL areas. The file
kernal.map in the build output will give you an idea about the sizes of segments. The
custom variant starts out with about 550 bytes of usable memory in the
config.inc: kernel config options
regress.sh: script that compares output with reference
drv/: disk drive driver source
inc/: include files: macros and symbols
input/: input driver source
kernal/: kernal source
reference/: original binaries from the cbmfiles.com version
Great care was taken to split the KERNAL into small, independent components. This division does not necessarily match the layout of the original binary code, but with the help of
.segments, the layout in the binary does not have to match the layout in source.
The goal of this division of the source was to keep the number of
.imports minimal (i.e. to make individual source files as self-contained and independent as possible).
One example of this is the file system and application/accessory loading code. In the original GEOS KERNAL binary, they were not separate, but here, the file system code is in
filesys.s and the loading code is in
load.s, with only two symbol dependencies.
Another example is the
ToBasic logic: In the original kernel, it the binary code was split, a part resided between the header and the jump table ($C000-$C0FF), and different part was in the “lokernal” area ($9000-$9FFF). In the source, both parts are in the same file
In case you want to adapt the source for other 6502-based systems, you will want to know which parts have C64 dependencies.
All C64-specific code can be easily recognized: Since all C64 symbols have to be imported from
c64.inc, you can tell which source files have C64 depencency by looking for that include. Remove the include to see which parts of the code are platform-specific.
conio.s, for example, accesses sprites directly, in the middle of hardware-independent code.
The GEOS KERNAL has a quite complicated memory layout:
The header and the jump table must be at $C000 and $C100, respectively. Together with the graphics bitmap at $A000, this partitions the KERNAL into four parts: lokernal, below header, between header and jump table, and above jump table.
The linker config file positions the segments from the source files into these parts. If the code of any segment changes, the header and the jump table will remain at their positions. If a part overruns, the linker will report and error, and you can consult the
kernal.map output file to find out where to best put the extra code.
But it gets more complicated: Code between $D000 and $DFFF is under the I/O registers, so it cannot enable the I/O area to access hardware. The macro
ASSERT_NOT_BELOW_IO makes sure that the current code is not under the I/O area. Existing code uses this macro just befor turning on the I/O area and just after turning it off. New code should use this macro, too.
_. (This hasn’t been done consistently yet.)
The original GEOS was copy protected in three ways:
Pull requests are greatly appreciated. Please keep in mind that a default build should always recreate the orginal binaries, so for smaller changes use conditional assembly using
.if, and for larger changes create new source files that are conditionally compiled.
The following command line will build the
wheels variants of GEOS and compare the resulting binaries with reference binaries:
boot.sshould be based on the original GEOS version
DlgBoxto support more than 16 files
For the underlying work on GEOS, please respect its license.
The intellectual property added by the reverse-engineering and the subsequent improvements is in the public domain, but the authors request to be credited.
GEOS was initially developed by Berkeley Softworks in 1985-1988.
The original reverse-engineering was done by Maciej ‘YTM/Elysium’ Witkowiak in 1999-2002, targeted the ACME assembler and was released as GEOS 2000, which included several code optimizations and code layout differences.
In 2015/2016, Michael Steil ported the sources to cc65, reconstructed the original code layout, did some more reverse-engineering and cleanups, and modularized the code aggressively.